Chlorine Gas Leak Monitor Brochure
Chlorine Gas Leak Monitor Drawings Chlorine Gas Leak Monitor Manual To comply with AS2927*, leak detectors shall be checked weekly by holding a weak source of chlorine near the air sample inlet |
4.8.1.1 Leak detectors shall be installed where chlorine is stored in tanks or where liquid chlorine is withdrawn from containers* Hydramet's chlorine gas leak monitors include the ATI Gas-Sens range utilizing the latest on-line gas monitoring technology to provide a flexible and reliable, self testing gas detection system in a compact modular design. The system from ATI consists of a panel mounted enclsoure complete with audible horn and containing individual receiver modules, a power supply unit and battery back-up unit all pre-wired and tested for ease of installation, to be located where required. Sensor transmitters, for location in areas where chlorine gas leakage or build-up may occur, provide the basic measurement for the system. Auto-test gas generators fitted to the sensor/transmitter automatically generate a small concentration of chlorine gas every 24 hours to verify sensor operation. Should the sensor not respond to the test, the trouble alarm on the receiver is activated. Analogue or digital verification is also provided, dependant on site conditions. C tick compliant to AS/NZS C1SPR11:2004 File No: HYD100706A-1  N27131 * Hydramet Pty Ltd – Referenced Australian Standards reproduced under copyright number 1011-c152 |
- All systems supplied pre-wired and tested for ease of installation
- Compact system suitable for 1 to 6 sensors each with individual receivers
- 4 digit LED display indicate chlorine gas concentration directly in PPM
- Auto-test feature ensures the sensor is regularly tested in accordance with Australian Standards and includes verification
- Battery back-up included with each system
- Isolated 4-20mA output for use in recording, data logging or computer input
- Two alarm setpoints for warning personnel of different levels of leakage
- Three alarm relays for external alarming if required
- Trouble alarm and relays for sensor fault indication
- Economical and low maintenance
- Complies with the performance requirements of AS2927: 2001 The Storage and Handling of Liquefied Chlorine Gas
|
