Hydra-Sentinel Shutdown System

Hydramet Water Treatment | Chlorinator>Water Treatment Products>Chlorine Gas>Hydra-Sentinel


Hydra-Sentinel Control Panel


Hydra-Sentinel Pneumatic Control Panel


Hydra-Sentinel Yoke Mount Actuator Arm

Shuts down chlorine cylinders and drums in under 3 seconds!

The Hydra Sentinel is an automatic isolation device for chlorine cylinders and drums for use in areas such as water and wastewater treatment plants. It is intended to shut the primary isolation valves on these containers in the event of detecting a significant gaseous chlorine leak.

The system is designed to shutdown gas containers under the following input conditions:

  • Gas Leak
  • Remote Stop

The system consists of a control panel made up of a Hydra-Sentinel control box designed to be fixed to a wall, and may be supplied with an integral chlorine leak detector if required. The unit includes integral power supply & battery backup.

An air regulator provides air at a reduced pressure (600 kPa) to the Hydra-Sentinel air box and from there, to a maximum of 6 actuator arm assemblies. Each arm is clamped directly to a container valve.

The rotary actuator, enhanced electronics and simplified pneumatics allow the system to isolate mutliple chlorine gas cylinders or drums in less than three seconds

Due to demand Hydramet have also developed pneumatic actuator arms for Prominent and Acromet vacuum regulators

C tick compliant to AS/NZS C1SPR11:2004

File No: HYD100706A-3

 

N27131

 

Hydra Sentinel Brochure

Hydra Sentinel Drawings

Hydra Sentinel Training Manual

Hydra Sentinel Operation Manual

 Features & Benefits
  • The control panel includes (7) light indicators for:
    • Power On
    • Power Loss
    • Low Air Pressure
    • Low Battery Voltage
    • Leak Detected
    • Test
    • Remote Input Active
  • Flashing warning light indicating the power switch is in the off position.
  • Battery back-up included with each system
  • Remote pneumatic panel with built in air pressure gauge.
  • Unique purpose built yoke mounted actuator arm, designed to connect directly to the yoke of a Wallace & Tiernan vacuum regulator without the need for additional adaptors.

 

 

Shuts down chlorine cylinders and drums in under 3 seconds!

Click image above to watch the short video