2 Electrode Conductivity Monitor Brochure
2 Electrode Conductivity Monitor Manual 2 Electrode Conductivity Monitor Drawing
|
Resistivity/Conductivity monitoring for deionizers, reverse osmosis systems, ion exchangers, and heat transfer units. This traditional 2-electrode conductivity monitor system provides reliable and accurate low-level measurements.
The Q45C2 conductivity meter can be configured to measure and display resistivity, conductivity, or total dissolved solids (TDS). The TDS factor is alos user selectable
The Q45C2 system offers three sensors for use in the indicated conductivity ranges.
0.05 K: 0-2.000 or 0-20.00µS; 0-20.00MΩ or 0-200.0kΩ
0.50 K: 0-20.00 or 0-200.0µS
1.00 K: 0-2,000µS
Measurement Range:
0.00 to 20.00, 0.0 to 200.0, or 0-2,000µS depending on cell constant. Sensitivity:
0.05% of selected range C tick compliant to AS/NZS C1SPR11:2004 File No: HYD100706A-2 
N27131 |
- Universal mounting configuration
- Loop-powered, AC or battery powered options
- Large, dual line display
- Intuitive user interface
- Dual alarm relays/analogue outputs
- Flexible calibration
|
