Q45/79 Chlorine Monitor Brochure

Q45/79 Chlorine Monitor Manual

 While chlorine has become the most widely used disinfectant in the world, there are still some applications where monitoring chlorine residuals can present a challenge. Multiple forms of chlorine in drinking water, wastewater effluent, and cooling tower water require a Total Chlorine measurement to ensure that all chemical species are quantified. In some cases, the chlorine concentration is quite low and often below the detection limits of conventional monitors.

ATI has developed a new total residual chlorine monitor with improved sensitivity and zero stability to meet these applications. The Q45H-79 Total Chlorine Monitor from ATI uses standard EPA approved iodometric chemistry where, by addition of buffer and potassium iodide, the various chlorine compounds in solution react to form iodine. The iodine released in this reaction is measured using a highly sensitive amperometric sensor capable of 1 PPB sensitivity. The output of this sensor is linear with respect to concentration and provides fast response for both upscale and downscale concentration changes.

Q45H-79 water quality monitors by ATI are available in two versions,one that includes all components conveniently integrated into a NEMA 4X fiberglass enclosure, and a second that separates the monitor from the chemistry system for applications where a more convenient display location is desired. A sample inlet filter assembly attached to the side of the enclosure allows filtered sample to be drawn from the inlet flow. Sample must be pumped to the inlet assembly at a rate high enough to insure the desired response time for the measurement system. Excess sample is bypassed to any convenient drain location.

C tick compliant to AS/NZS C1SPR11:2004

File No: HYD100706A-2

N27131

 

Features & Benefits

  • Sensing: measurement is made with a direct reading membraned amperometric iodine sensor
  • Standard Method: Total chlorine is measured using EPA recommended method for reaction of sample with buffer and potassium iodide, and measurement of iodine released in the reaction.
  • High Accuracy, High Sensitivity: Measures from 0.001 PPM to 20.00 PPM 
  • Large Alphanumeric LCD Display: Provides total residual chlroine diaply, alarm status and all configuration information.
  • Two Control Relays: programmable for control and alarm function.
  • Isolated Outputs: Two assignable 4-20mA outputs configured to track residual chlorine, temperature or assigned to PID control.
  • Selectable PID Controller: PID includes manual operation feature and diagnostic feature for relay notification and control problems.